Wood Magazine 187 by Bill Krier

Author:Bill Krier
Language: eng
Format: epub
Tags: Wood, Home and hobby woodworker
Publisher: Meredith Corporation
Published: 2008-03-25T04:00:00+00:00

Taping two 'A" strips to the narrow front trim (D) ma kes it easy to trace, cut, and pattern-rout mating curves on the wide front trim (E).

With the beveled test pieces taped together, check that the ends parallel the edges of the routed profile on the bottom panel assembly.

core box bit

Keep the point of the beveled edge on the face stile (H) firmly against the router-table fence as you rout each flute.

58

WOOD magazine November 2008

your table-mounted router, and adjust it to cut W deep. Attach a hardboard auxiliary fence to the router-table fence for a smooth surface, and use side-rail scraps to test and adjust the fence position until the groove is centered on the thickness of the scraps [Photo G].

6Attach a stop to the router-table auxiliary fence ZVz" from the bit center. Using a pushpad, rout a groove at both ends of each side rail (1) Photo H] and on the inside edges of the rear stiles (F) and front side stiles (G) [Drawing 5]. Leave your router table set up this way, without the stopblocks, for the shelves.

7Cut the shelf back rails (N) to size. Then cut 3V2"-wide blanks to length for each pair of shelf sides (O), and cut the shelf front rails (P) W" oversize in width. Using the router-table setup from Step 6, rout H"-deep centered grooves on the inside edges of the shelf back rails and front rails [Drawing 7],

8Use a pushpad and backer block to rout grooves in the ends and then the edges of the shelf side blanks (O). With the grooved edges against the fence, rip the blanks to width [Drawing 7], Then set them aside.

RIGHT SIDE ASSEMBLY (Viewed from inside)

W rabbet V*' deep along inside back edge

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.